




CNC Turning
CNC turning for shafts, bushings, flanges and fittings. Ø250 × 200 mm max, ±0.1 mm standard, ±0.01 mm achievable. Small batches ship in 3–5 days.
-
LEADER PROTO turns custom shafts, bushings, flanges and fittings in metals and engineering plastics. Parts up to Ø250 mm in diameter and 200 mm long, held to ±0.1 mm as standard and ±0.01 mm on critical features. Small batches ship in 3–5 days, with quotes answered within 24 hours.
What we turn
Shafts, bushings, sleeves, flanges, fittings, threaded parts and knurled knobs — from a single prototype to small production batches. Parts that also need milled features are handled together with our CNC machining service, so turned and milled features stay true to each other. See examples in our article on turned shaft parts, flanges and knurled knobs.
Tolerances we hold
Standard turning tolerance is ±0.1 mm. On critical features — bearing seats, sealing faces, mating diameters — we hold ±0.01 mm. Every drawing gets a manufacturability review before production, and tolerances are confirmed feature by feature with the quote.
Size and tolerance at a glance
| Process | Max size | Standard tolerance | Best achievable |
|---|---|---|---|
| CNC turning | Ø250 × 200 mm | ±0.1 mm | ±0.01 mm |
Threads and knurling
Internal and external threads are cut or tapped as drawn. Knurling is available on knobs, grips and adjustment rings, in the pattern and pitch the drawing specifies. Small steel parts can be batch-finished — black oxide, plating or passivation — as part of the same order; our article on batch turning small parts with black oxide shows how that runs.
Materials we turn
Aluminum alloys, stainless steel, carbon steel, copper, brass, titanium (Grade 2 and Grade 5), and engineering plastics including POM, PEEK and nylon. Surface finishing — anodizing, plating, black oxide, passivation and more — is quoted and done as part of the same order.
How fast we deliver
Prototype and small-batch orders typically ship in 3–5 days. Simple parts can ship within 24–48 hours, depending on complexity and finishing. Repeat batches are scheduled per order.
Quality, documented
Every batch is inspected before it ships — CMM, vision measuring system, calipers, micrometers and hardness testing. On request we provide FAI first-article reports, material certificates and a CofC. NDAs are signed on request, before drawings change hands.
Frequently asked questions
What is the largest part you can turn?
Up to Ø250 mm in diameter and 200 mm long. For parts near these limits, send the drawing — we will confirm chucking and travel before quoting.
What tolerances can CNC turning hold?
Our standard turning tolerance is ±0.1 mm. On critical features — bearing seats, sealing faces and mating diameters — we can hold ±0.01 mm. Send your drawing and we will confirm feature by feature before quoting.
Can turned parts also have milled features?
Yes. Parts that need both turning and milling — flats, cross holes, slots, hex faces — are finished in one setup where possible, so the features stay concentric with the turned diameters.
Can you cut internal and external threads?
Yes, both internal and external threads are cut or tapped as drawn. Thread callouts are checked against the drawing at the manufacturability review, before production starts.
Can you knurl parts?
Yes. Knurling is available on knobs, grips and adjustment rings, in the pattern and pitch your drawing specifies.
How long does a batch of turned parts take?
Prototype and small-batch turning orders typically ship in 3–5 days. Simple parts can ship within 24–48 hours, depending on complexity and finishing.
What materials can you turn?
Aluminum, stainless steel, carbon steel, copper, brass, titanium (Grade 2 and Grade 5), and engineering plastics including POM, PEEK and nylon.
Can you finish small steel parts in batches?
Yes. Small turned parts are run in batches and can be black-oxided, plated or passivated as part of the same order — see our article on batch turning with black oxide finish.
How do I get a quote?
Send your drawing through the contact page or by email. Enquiries are answered within 8 hours and quotes within 24 hours. If a feature needs adjusting for manufacturability, we will flag it with the quote.
What inspection documents can you provide?
Every batch is inspected before shipping. On request we provide a first article inspection (FAI) report, material certificates and a certificate of conformance (CofC).
Can you sign an NDA?
Yes. We are happy to sign an NDA before you send drawings. Files are only used to quote and manufacture your parts.
Send a drawing — quote within 24 hours. Contact us to start.



