Blog

Why Tungsten Carbide Takes 20–30 Days

Tungsten carbide parts can't be milled like steel — they're ground and wire-cut. Here's why YG10X components take 20 to 30 days, and what that buys you.

Wire EDM machine cutting a tungsten carbide part
If you send us a tungsten carbide part, the lead time is usually 20–30 days. Compared with our usual 3–5 days for a small batch in a common material — and 24–48 hours for simple parts — that can sound like a lot. There is a straightforward reason for it.
Tungsten carbide is not machined the way aluminum or steel is. We do not mill it or turn it. The material is so hard that it has to be shaped with special processes, mainly EDM and grinding, and those processes remove material slowly, step by step. A feature that takes minutes on a milling machine can take hours this way.
That time is not padding. It is what making the part to your drawing actually takes. We work to your dimensions and we never change your design — we only look for the best way to make it. If a faster route existed that still met your drawing, we would use it.
A few things that help if you are planning a tungsten carbide order:
  • Send the drawing as early as you can. The 20–30 days start once we have everything we need to quote and plan the work.
  • Tell us the material grade and the finish you want along with the drawing. That saves a round of questions at the start.
  • If your schedule is tight, tell us. Sometimes part of an order can move first, and we would rather talk about it than surprise you later.
  • If you are not sure whether your part really needs tungsten carbide, send the drawing and ask. Sometimes a hard steel or a coated part does the same job in half the time, and we will tell you if we think so.
For everything else we make — aluminum, stainless steel, carbon steel, brass, copper, titanium and engineering plastics — the normal clock applies: a few days, not a few weeks. Tungsten carbide is the exception, and it is an exception worth planning around.

Read next

More from the blog

More notes on machining, materials and finishing.