Inch Drawings for CNC Machining
Send your inch drawings as they are. How we read title-block tolerances, GD&T and thread callouts in inches, and confirm the units back on your quote.

Many of our customers draw in inches, and the drawings arrive from the US exactly as their own shops would receive them. That is how it should be: you should not have to convert your own drawing to metric before an overseas supplier will look at it. This page explains what happens to an inch drawing when it reaches us — how the title block is read, how tolerances and threads are interpreted, and what we confirm back to you before any metal is cut.
Inch dimensions, converted exactly and checked to your limits
Inch dimensions are converted at the exact factor (1 in = 25.4 mm), with no rounding, and every tolerance is checked against your inch limits. A bore drawn at 1.000" ±.0005" is inspected to those limits, not to a rounded metric approximation.
Title-block tolerances: the pattern we expect
Most US drawings set their default tolerances in the title block, typically by decimal places — the familiar pattern where .XX dimensions carry ±0.01", .XXX dimensions carry ±0.005", and angles carry their own default. We quote and inspect against your title block as written. If your block uses a different pattern, or a dimension on the drawing overrides the block, the drawing wins and the quote says so. Our CNC tolerances guide explains how we think about which tolerances are worth paying for; the short version is that the title block is a contract, and we price to the one on your drawing, not to a house standard of our own. Fractional dimensions follow the fractional tolerance in your title block (commonly ±1/64").
Surface finish callouts in microinches (63, 125 µin) are read directly — the conversion table is in our surface roughness guide.
GD&T is read as written
Where a feature needs more than a plus-minus tolerance, ASME Y14.5 callouts — flatness, position, perpendicularity, runout — are read and inspected as specified. A positional tolerance on a hole pattern is not silently converted into looser coordinate tolerances, and a flatness callout on a mounting face is planned into the machining and the inspection, not discovered at the end. If a callout is ambiguous or conflicts with another note, that question comes back to you at quote stage, before the job is priced — the same manufacturability check we run on every drawing, described in our quote guide.
Threads: UNC and UNF are home territory
US drawings call out UNC and UNF threads with their class (2A/2B is the usual fit), and that is how the parts are made and gauged — a 1/4-20 UNC-2B hole is tapped and checked as exactly that, not substituted with the nearest metric thread. Where a drawing mixes systems (a metric thread on an otherwise inch part, which happens on assemblies with imported components), each thread is made as called out. If a thread callout is incomplete — no class, or a depth that cannot be gauged — we flag it with the quote rather than guessing.
Inch stock sizes and sheet gauges
US drawings often assume inch stock without saying so: 0.250" plate, 1/2" round bar. The stock readily available to us is metric — 6 mm plate, 12 mm bar — close to the inch sizes, but not identical. The difference only matters where a finished face is allowed to remain an as-supplied stock surface. If your design allows that, say so on the drawing; at quote stage we confirm in writing whether we machine down from the next thicker stock or use the nearest metric size with your agreement. Stock is never substituted silently, and your design is never changed to suit our shelf.
Sheet metal brings the same issue in gauge form: a gauge number — 16 ga, say — means a different thickness in steel, stainless and aluminum. At quote stage we convert the gauge to a specific thickness and confirm it with you before material is ordered.
What we confirm back to you
The quote restates the essentials so you can check our reading of your drawing before you commit: the unit system, the title-block defaults we are working to, the material grade and temper, the finish, and any dimension or callout we interpreted in a way worth surfacing. That confirmation step is where unit misunderstandings die — on paper, at quote stage, not at your receiving bench. If you need inspection records in inches, say so with the enquiry and the reporting is planned in inches from the start.
Dual-dimensioned drawings
If your drawing carries both inch and metric dimensions, tell us which system governs. Where one is bracketed as reference, we work to the governing system and use the other only as a cross-check. Conflicts between the two are flagged at quote stage, not resolved silently at the machine.
Send the drawing as it stands through our contact page — PDF plus the 3D model (STEP, X_T or IGES) if you have one. We respond within 8 hours and normally quote within 24 hours, in the units your drawing uses.
FAQ
Do I need to convert my drawing to metric before sending it? No. Send it in inches, as drawn. Converting it yourself only adds a rounding step neither of us needs.
How do you handle title-block default tolerances? We quote and inspect to your title block exactly as written — the decimal-place pattern, the angular default, and any general notes. Drawing-specific dimensions override the block, as usual.
Can you work to ASME Y14.5 GD&T? Yes. Flatness, position, perpendicularity and the other common callouts are read and inspected as specified under ASME Y14.5. Ambiguities are raised at quote stage.
Do you make UNC/UNF threads, or substitute metric? We make them as called out — UNC and UNF in the specified class, tapped and gauged as such. No metric substitutions.
What if my drawing has both inch and metric dimensions? Tell us which governs. We work to that system, treat the other as reference, and flag any conflict between the two before quoting.
My drawing assumes inch stock (for example 1/4" plate). Is that a problem? No. We machine from stock that meets your finished dimensions, and if an as-supplied surface is allowed on the drawing, we confirm the nearest available stock size with you at quote stage before ordering material.



